I've retained the original formatting so you may have to adjust it to get the file to display and/or print correctly. Noisy phone lines caused the occasional glitch or truncated file. I replaced some, but not all, instances of line noise with "[ERROR]" where applicable.

DO NOT FOLLOW THESE DIRECTIONS UNDER ANY CIRCUMSTANCES! THIS INFORMATION IS SHOWN FOR HISTORICAL PURPOSES ONLY.

(?=MENU,1-15) =>: 3

---------------------------------------

-PRESS SPACEBAR TO QUIT-


        MAKING THERMITE
          BY X CALIBUR

  THERMITE IS A POWERFUL SUBSTANCE
WHICH CAN BURN THROUGH PRACTICALLY
ANYTHING, SAVE TUNGSTEN. IT IS 
ESPECIALLY OF USE IN TRYING TO CRACK
OPEN A FORTRESS FONE.  NOW HERE'S HOW
YOU MAKE IT. IT IS VERY SIMPLE.
  THE FIRST STEP IN MAKING THERMITE IS
TO MAKE HEMATITE. IN LAYMAN'S TERMS,
HEMATITE IS IRON OXIDE (RUST). HERE IS
A GOOD METHOD OF MAKING LARGE QUANTITIES
OF RUST. OU WILL ELECTROLYZE A METAL
ROD, SUCH AS A COMMON NAIL. YOU WILL
NEED A SOURCE OF DC POWER AS WELL. AN
ELECTRIC TRAIN TRANSFORMER IS PERFECT.
ATTATCH THEROD TO THE POSITIVE WIRE.
                      ^^^^^^^^
THEN PLACE THE ROD AND THE NEGATIVE
WIRE IN OPPOSITE SIDES OF A GLASS JAR
FILLED WITH WATER. PUT A LITTLE SALT
IN THE WATER, JUST ENOUGH TO MAKE IT
CONDUCT WELL (A TEASPOON). LET THE
SETUP SIT OVERNIGHT. IN THE MORNING,
THERE WILL BE A DARK RED CRUD IN THE
JAR. FILTER ALL THE CRUD OUT OF THE
WATER OR JUST FISH IT OUT WITH A SPOON.
NOW YOU WILL NEED TO DRY IT OUT. HEAT
IT IN AN IRON POT UNTILL IT ALL TURNS
A NICE LIGHT RED.
  THE OTHER INGREDIANT YOU WILL NEED
IS ALUMINUM FILINGS. YOU CAN EITHER
FILE DOWN A BAR OF ALUMINUM, OR (AS
I SUGGEST) BUY ALUMINUM FILINGS AT
YOUR LOCAL HARDWARE SHOP. (IF YOU BUY
THE BAR USE NO LESS THAN 94% PURE
ALUMINUM. IT IS CALLED DURALUMIN.)
 THAT'S ALMOST IT. NOW, MIX TOGETHER
THE RUST AND ALUMINUM FILINGS. THE
RATIO SHOULD BE 8 GRAMS OF RUST PER
3 GRAMS OF ALUMINUM FILINGS. THAT'S
THERMITE!
  NOW, TO LIGHT IT! STICK A LENGTH OF
MAGNESIUM RIBBON IN A PILE OF THE
THERMITE. (EITHER STEAL IT FROM CHEM
LAB OR BUY IT AT YOUR LOCAL HARDWARE
STORE. IF NOT, ORDER FROM A CHEMICAL
SUPPLY HOUSE. IT'S PRETTY CHEAP.)
THE RIBBON SHOULD STICK INTO THE 
 THERMITE LIKE A FUSE.  NOW YOU LIGHT THE
MAGNESIUM WITH A BLOWTORCH. (DON'T
WORRY. THE TORCH ISN'T HOT ENOUGH TO
LIGHT THE THERMITE.) WHEN THE BURNING
MAGNESIUM REACHES THE THERMITE, IT
WILL LIGHT. WHEN THE THERMITE BURNS,
GET THE HELL BACK! THAT STUFF CAN
VAPORIZE CARBON STEEL. IT DOES 
WONDERS ON HUMAN FLESH.